EXECUTIVE PARTIONING | PREMIER

DETAILED DESCRIPTION

Executive Premier Range is a fully demountable and relocatable partitioning system, which is installed spanning full height from floor to suspended ceiling level, with any combination of solid elevation, full or half height single or double glazing with integral blinds and door modules to facilitate any internal layout.

Premier combines a primary steel or aluminium framework with the finesse of powder coated architectural profiles to present a fully re-locatable solution to the demands of a modern commercial environment.

The visible aluminium sections are powder coated in any RAL colour, and can be easily cleaned using a general domestic cleaner and a damp cloth. Please note that on no account should excessive amounts of water be applied to the frame at any point.

Solid elevation partitioning comprises two faces of pre-decorated plasterboard retained by vertical omega trims with colour coded inserts, which complement the practically infinite combinations of profile colour and vinyl decoration. As an alternative to the plasterboard option, the system is fully interchangeable with the 70mm solid Monobloc system, which incorporates pre-finished high density particle board panels with integral service ducts. The panel finish is a pure p.v.c vinyl wallcovering, which can be cleaned with a domestic cleaner, such as Jif, and a damp cloth. Please note that on no account should excessive amounts of water be applied to the panels at any point.

The system allows virtually any permutation of glazing to enhance or even define a corporate identity. Standard glazing comprises 6.4mm laminated safety glass and options for face fixed or integral cable operated Venetian blinds. The system can also accept either toughened, Georgian wired or Pyran glass to meet BS fire regulations and specifications. Manifestations can be applied to the glass before or after installation, the design of which can reflect a corporate image or company logo. Maintenance of the glass is quite simply to use a domestic glass cleaner and cloth.

Double glazed units are sealed with glazing tape and will not allow any dust or dirt to get into the unit. The blinds within such sealed units, therefore, will not require any cleaning or maintenance. Defects with the operation of the blinds should be reported to the installer for rectification. Face fixed blinds to single glazing should be dusted or wiped with a damp cloth to maintain their appearance. The aluminium slats are relatively fragile and care should be taken not to damage them.

Door units comprise 826mm x 2040mm x 44mm solid core door leaves, finished in any hardwood veneer, laminate or melamine. The doors are set within powder coated universal reversible aluminium frames. Ironmongery can either be aluminium, stainless steel, brass or colour coded nylon. Maintenance of metal ironmongery should be with an associated polish, whilst nylon ironmongery can be cleaned with a household cleaner and damp cloth as required.